Store lyophilized peptide at -20°C (or 2-8°C short-term). Reconstituted solution
should be refrigerated at 2-8°C, protected from light.

No. All products are strictly for research purposes only and are not
intended for human or veterinary use, clinical trials, or therapeutic applications.

All peptides available through True Peptide meet a minimum purity threshold of 99%+, which is among the highest standards in the compounded research peptide industry.

Every batch undergoes rigorous third-party laboratory testing before it reaches our clients. Our quality verification process includes:
Purity Analysis via HPLC — High-Performance Liquid Chromatography (HPLC) is used to confirm that each compound meets or exceeds the 99%+ purity specification by precisely separating and quantifying all components in the batch.

Mass Spectrometry (MS) Confirmation — Mass spec testing verifies the molecular identity and structural integrity of the peptide, confirming you’re receiving exactly what’s on the label.

Endotoxin Testing — Each batch is tested and confirmed endotoxin-free using LAL (Limulus Amebocyte Lysate) or equivalent testing methods, ensuring the highest level of safety for research use.

Sterility & Compounding Standards — All peptides are compounded in a certified U.S.-based facility operating under strict quality controls, with each batch traceable to its Certificate of Analysis (CoA).

A Certificate of Analysis (CoA) is an official document issued by an independent, accredited laboratory that confirms the identity, purity, and safety of a specific batch of peptide. Every batch we ship is backed by a CoA — it’s your proof that what’s in the vial matches exactly what’s on the label.

What You’ll Find on a Peptide CoA:

Product Identity — The peptide name, molecular formula, molecular weight, and batch/lot number. This confirms you have the correct compound and allows full traceability.

Purity Result (HPLC) — Expressed as a percentage (e.g., 99.4%). This is the most important figure. It tells you what portion of the compound is your target peptide versus trace impurities. Our peptides are guaranteed at 99%+.
Molecular Weight Confirmation (Mass Spec) — Listed in Daltons (Da). This verifies the peptide’s structural integrity and that no degradation or contamination has altered the compound.

Endotoxin Level — Measured in EU/mg (Endotoxin Units per milligram). A passing result confirms the batch is safe from bacterial contamination byproducts that could interfere with research outcomes.

Appearance — Typically noted as a white to off-white lyophilized (freeze-dried) powder. A visual confirmation of expected physical form.

How to Read the Purity Result:

The HPLC purity percentage is your headline number. Anything at or above 99.0% meets our quality threshold. Some COAs will also show a chromatogram — a graph with peaks representing different compounds detected. A clean result shows one dominant peak (your peptide) with minimal secondary peaks (impurities).

Bacteriostatic water (BW) is sterile water for injection that contains 0.9% benzyl alcohol as a preservative. The benzyl alcohol inhibits the growth of bacteria, which is what makes it “bacteriostatic” — it doesn’t kill bacteria outright, but prevents them from multiplying in the solution.

Why It Matters for Peptide Research:

Lyophilized (freeze-dried) peptides must be reconstituted with a liquid before use. Bacteriostatic water is the standard choice for this because it allows a single vial to be accessed multiple times over an extended period without risking contamination — unlike plain sterile water, which should ideally be used in a single session.

Bacteriostatic Water vs. Sterile Water — What’s the Difference?

Bacteriostatic Water — Contains 0.9% benzyl alcohol. Suitable for multi-use vials. Keeps reconstituted peptides stable and protected from bacterial growth for up to 28 days when stored properly (refrigerated at 2–8°C / 36–46°F).

Sterile Water for Injection — Contains no preservative. Single-use only. Once a vial is opened and a peptide is reconstituted, it should be used promptly.

For research applications involving repeated draws from the same vial, bacteriostatic water is the appropriate choice in nearly all cases.

Storage After Reconstitution:
Once a peptide is reconstituted with bacteriostatic water, it should be stored in the refrigerator (2–8°C), kept away from light, used within 28 days, and never frozen after reconstitution.

Where to Source It:
Bacteriostatic water is available through True Peptide alongside our peptide catalog, ensuring you have everything needed for your research in one place.

Proper storage is one of the most important factors in maintaining peptide integrity and ensuring reliable research results. Peptides are sensitive compounds — exposure to heat, light, moisture, and repeated freeze-thaw cycles can degrade them over time. Following these guidelines will protect your investment and keep your peptides stable for as long as possible.

Lyophilized (Freeze-Dried) Peptides — Before Reconstitution:

Lyophilized peptides are the most stable form and have the longest shelf life when stored correctly. Keep them in the freezer at -20°C (-4°F) for long-term storage. If you plan to use a peptide within a few weeks, refrigeration at 2–8°C (36–46°F) is acceptable. Always store vials away from light, ideally in their original packaging or a dark container. Keep vials sealed and dry — moisture is one of the primary causes of peptide degradation.

Reconstituted Peptides — After Adding Bacteriostatic Water:

Once a peptide has been reconstituted, it is significantly more sensitive and must be handled accordingly. Store reconstituted vials in the refrigerator at 2–8°C (36–46°F). Use within 28 days of reconstitution. Never freeze a reconstituted peptide — this damages the structure of the compound and reduces its effectiveness. Keep vials upright, away from light, and tightly capped between uses.

General Best Practices:

Only reconstitute what you need. If you have multiple vials, keep extras lyophilized and frozen until needed. Allow frozen vials to come to room temperature naturally before opening — do not use heat. Minimize the number of times you open or handle vials to reduce contamination risk. Label vials with the reconstitution date so you can track the 28-day window accurately.

Peptide stability depends on several factors: whether the peptide has been reconstituted, how it is stored, and the specific compound in question. As a general rule, lyophilized peptides stored correctly are highly stable, while reconstituted peptides have a much shorter usable window.

Lyophilized (Freeze-Dried) Peptides:

When stored in the freezer at -20°C and kept away from moisture and light, most lyophilized peptides remain stable for 24 months or longer. Refrigerated storage at 2–8°C is suitable for shorter-term use, typically within 3–6 months. The lyophilization process is specifically designed to extend shelf life by removing water — the primary driver of peptide degradation — which is why all Peptide Club compounds are shipped in this form.

Reconstituted Peptides:

Once mixed with bacteriostatic water, the stability window shortens considerably. Reconstituted peptides stored in the refrigerator at 2–8°C should be used within 180 days. After this window, potency and integrity cannot be guaranteed. Freezing a reconstituted peptide is not recommended, as the freeze-thaw process disrupts the peptide structure and accelerates degradation.

Factors That Shorten Stability:

Heat — Elevated temperatures accelerate the breakdown of peptide bonds. Keep peptides away from warm environments and never leave vials at room temperature for extended periods.

Light — UV exposure degrades peptides over time. Store vials in dark conditions or in opaque containers.
Moisture — Even small amounts of humidity can compromise a lyophilized peptide. Keep vials sealed until ready to use.

Repeated freeze-thaw cycles — Each cycle stresses the compound. If long-term storage is needed, consider dividing a batch into smaller aliquots so only what is needed is thawed at a time.

A Note on Peptide-Specific Variation:

Some peptides are inherently more stable than others due to differences in their amino acid sequences and structural properties. 

At this time, True Peptide does not ship internationally. We currently serve customers within the United States only.

True Peptides USA is committed to exceptional purity, consistency, and quality. Our research peptides are compounded in the USA and produced with advanced synthesis methods to support reliable laboratory research. Each product undergoes rigorous quality-control testing to help ensure purity, consistency, and performance for critical research applications. Purity levels are typically >99% depending on the specific compound and batch. All Starbucks COAs.

Exceptional customer service is at the core of what we do. Our team is on call and ready to respond quickly to any questions or concerns.

No. True Peptides USA products are intended strictly for lawful laboratory research purposes only. They are not intended for human consumption, injection, ingestion, animal use, clinical use, therapeutic use, diagnostic use, or any medical application.

Yes, True Peptides USA offers custom peptide synthesis services tailored to your sequence, purity level, and quantity needs. Please contact us with your specific requirements.

Partner with True Peptides USA today and experience unmatched peptide quality, precision, and reliability — trusted by scientists worldwide.